KNX Integration

KNX Connection

The Iconet Gateway connects to your KNX/TP bus through the built-in bus coupler. No additional interface is required.

ETS Project Import

You can import your ETS project file to automatically configure all group addresses:

1. Export your ETS project as .knxproj file
2. Open the gateway dashboard → Configuration → KNX
3. Click Import ETS Project
4. Upload the file and select which group addresses to expose

Manual Configuration

Alternatively, add group addresses manually:

1. Go to Configuration → KNX → Group Addresses
2. Click Add Group Address
3. Enter the group address (e.g., 1/0/1)
4. Select the datapoint type (DPT)
5. Assign a name and room

Supported Datapoint Types

KNX Monitoring

The dashboard includes a real-time KNX bus monitor under Tools → Bus Monitor that shows all telegrams on the bus.