Network Setup
Configure network settings for the Iconet Gateway.
Default Network Configuration
By default, the gateway uses DHCP to obtain an IP address automatically.
Access the gateway at:
http://iconet.local
Static IP Configuration
To set a static IP address:
- Open the web dashboard
- Go to Settings → Network
- Switch from DHCP to Static
- Enter your desired IP, subnet mask, gateway, and DNS
Firewall Requirements
The gateway requires the following ports:
| Port | Protocol | Purpose |
|---|---|---|
| 80 | TCP | Web dashboard |
| 443 | TCP | Secure dashboard |
| 5353 | UDP | mDNS discovery |
| 5540 | TCP | Matter commissioning |
VLAN Support
The gateway supports VLAN tagging for network segmentation. Configure VLAN settings under Settings → Network → Advanced.