Trends
Energy, history and costs on one board you arrange yourself.
One board
Trends is a single board of cards. The energy cards fill themselves once you tell the gateway which meters measure what; the rest you add: any device's history as a chart, comparisons, peaks.
- Edit — drag cards to reorder, pick a size (S, M, L, XL), hide the ones you don't need. Done when you're happy.
- ⋯ on a card — resize, rename, remove.
- + Add — a sheet with everything you can put on the board, each with a drawing of what it will look like.
Some of what you can add
Setup (the gear)
Open Setup and pick the devices that measure your home:
| Source | What to select |
|---|---|
| Grid | The meter at the point of connection (power, or import/export energy counters) |
| Solar | The inverter's power or energy output |
| Battery | Battery power and state of charge |
| Home | Total consumption, if you have a separate meter |
Then set your prices: electricity per kWh, what you receive per exported kWh and, if you meter them, water and gas. Every cost and savings figure on Home and Trends is calculated from these numbers.
Ranges
Every card follows the range you choose at the top: Today, Week, Month or Year. Times are shown in the gateway's time zone.
First time
Before any meter is set, Trends shows what each card will become and the two steps to get there. Nothing is invented: cards stay empty until real data arrives.
Where the data lives
History is recorded on the gateway itself, for every device, whatever integration it comes from. Nothing leaves your network. The same series are available to the assistant and to connected AI clients through the Read trends permission.