System requirements
Hardware, network and what the gateway connects to.
The gateway
| Mounting | DIN rail, 4 modules |
| Power | PoE (IEEE 802.3af) or 24 V DC |
| Consumption | under 5 W |
| Network | Ethernet 10/100, RJ45 |
| Radios on board | Zigbee 3.0 · Thread (border router) |
| Wired buses | KNX TP · DALI‑2 |
| Operating temperature | −10 °C to +50 °C |
Network
- Ethernet, DHCP by default (static IP available in Settings › Network).
- mDNS on the local network so
http://iconet.localworks. - Internet is optional: it is used for updates, the weather forecast and the AI assistants you connect. Everything else runs offline.
What it connects to
| Integration | What |
|---|---|
| KNX | Any KNX TP device; the gateway is also a KNXnet/IP interface for ETS |
| DALI | DALI‑2 luminaires, up to 64 addresses per bus (external DALI power supply required) |
| Zigbee | Zigbee 3.0 devices on the built‑in coordinator |
| Thread / Matter | Matter devices over Thread (built‑in border router) and over your IP network |
| Third‑party | Controllers and services from other makers, adopted over the network |
| Cameras | RTSP and ONVIF cameras |
| Notifications | Telegram, WhatsApp, e‑mail, ntfy, webhooks |
| Smart home | Apple Home, Google Home, Amazon Alexa, SmartThings through the Matter bridge |
Browser
Any current browser on a computer, tablet or phone: Safari, Chrome, Edge, Firefox. The web app adapts to the screen size; no app store install is needed.